Hobart
Hobart Appliance Repair in Las Vegas
Service for Hobart LXe undercounter, door-type and conveyor dishwashers in restaurants, hotel kitchens, bars and schools, focused on rinse temperature, scale and water flow.
Phones answered 24/7
Brands We Service
Houses, Condos, Rentals & Garages
How a Repair Visit Works
Related Services
Other appliance and brand repairs we handle in the south and southwest Las Vegas Valley.
Hobart Appliances We Repair
Hobart Repair Questions
Straight answers to what people ask before booking. If your question isn't here, send it with your booking request and we'll answer it.
Still have questions?
We cover 15 ZIP codes in Enterprise, Spring Valley, Paradise and southern Henderson.
Scale on the booster heater element is the most common reason in this valley. It insulates the element so it heats slowly and cannot keep up between racks. A failed element, thermostat or contactor, or incoming water that is too cool, can do the same. We read the temperatures, test the heater circuit and delime or replace the element as needed.
It depends on your water treatment and volume, but with untreated valley water many kitchens need it far more often than they expect. White crust on the tank walls, wash arms or rinse nozzles is the sign. Follow the deliming procedure for your model, and consider water treatment ahead of the machine if scale keeps returning quickly.
First confirm the door is fully down and the tank has filled, since many models will not run on a low tank. Check the main power and that the water valves are open. If those are fine, a door switch, fill solenoid or float may have failed. We test each one and replace the part that is at fault.
Yes. A low-temp machine relies on chemical sanitizer, so we test the sanitizer pump, pickup tube and concentration at the rinse. A high-temp machine relies on the booster heater, so heat is the focus there. Both need clean wash arms and working pumps, but the sanitizing checks are completely different.
Common sources are a drain valve that is not sealing, a worn pump seal, a loose hose clamp or a tank gasket. Overfilling from a stuck fill solenoid can also push water out at the door. We dry the area, run a cycle and trace the leak to its source before quoting the repair.
No. TrueFix Las Vegas is an independent repair company with no affiliation to Hobart. If your Hobart is still under the manufacturer's warranty, contact Hobart first, because work by an independent shop may not be covered by that warranty. Once it is out of warranty, or if the warranty route does not work for you, we are glad to take a look.
Servicing Hobart in the Las Vegas Valley
Hobart warewashers run in high-volume kitchens all over the valley: LXe undercounter units behind bars and in smaller restaurants, door-type machines in busy kitchens, and conveyor and flight-type systems in hotel and institutional operations. They connect to dedicated water, drain and electrical service, and on high-temperature models a booster heater brings rinse water to sanitizing temperature.
When a Hobart misses its rinse temperature, dishes come out unsanitized and the kitchen can fall out of compliance, which is why our Hobart dishwasher repair visits start with temperatures and chemistry, not just whether the machine runs. Hard valley water makes scale the constant background problem. We diagnose on site and quote one price before repair.
High-temp, low-temp and why it changes the visit
A high-temperature Hobart sanitizes with heat, so the booster heater, its element, thermostat and fill controls carry the load. A scaled element heats slowly, recovery between racks lags, and the final rinse dips below what the gauge should show.
A low-temperature machine sanitizes with chemistry. There the critical parts are the sanitizer pump, its pickup tube and the dosing settings. A machine that looks perfect but is not feeding chemical is still a compliance problem, so we test sanitizer concentration with strips rather than assuming.
Common Hobart repairs by machine type
Undercounter LXe: booster heaters scaled or not heating, wash and rinse arms clogged with food and minerals, drain pumps and drain valves leaking, and door switches that stop the cycle from starting. Door-type: fill solenoids stuck open or closed, wash pump seals, door switches worn by thousands of cycles, and chemical feed faults.
Conveyor and flight-type: we service the same core systems (heat, pumps, fill and drain) plus the conveyor drive and curtain arrangement. On every machine we check for scale on elements, arms and solenoid valves, because it is behind so many of the other failures.
Daily habits that prevent calls
Pull and rinse the scrap screens and wash arms at the end of each shift; clogged arm nozzles cause most poor-wash complaints. Watch the wash and rinse gauges during the first racks of the day and note any drop. Keep the chemical containers full and the pickup tubes submerged.
Before calling, confirm the main breaker and water supply valves are on, and that the door is closing fully against its switch. Never reach into the tank while the machine is powered; shut it off at the switch and let hot water cool first.
Repair, rebuild or replace a Hobart
Hobart machines are built to be serviced for many years. Elements, pumps, solenoids, switches and arms are all replaceable, and a thorough delime often restores performance on its own. Replacement starts to make sense when a tank or frame is corroded through, or when the volume has outgrown the machine. We tell you which you are facing after the diagnosis.